Skip to main content

In and back out. On the same side.

The box goes into the cabinet, the shutter closes, and within a few seconds the whole contents are read. Then the box comes back where it went in. That sounds like a detour but it is exactly the advantage: you need one workstation and one person, and the setup takes up considerably less floor than a tunnel.

Talk through your processAll hardware

200 tags or more in three to five seconds, in a closed chamber.

The STOCKflow scan cabinet: a white cabinet with an open front and a belt inside, a feed table in front of it and a touchscreen showing the counter.
One opening, one belt that reverses. The box comes back to whoever put it in.

Specifications

Reading
200+ tags in 3 to 5 seconds
Maximum box size
700 × 700 × 700 mm
Inside dimensions
800 × 800 × 880 mm
Load capacity
50 kg
Belt speed
0 to 40 m/min, reversible
Door
One shutter, opens in 1 second
Outside dimensions
960 × 1120 × 1706 mm
Weight
About 240 kg

When this fits, and when it does not

Wel

  • Read boxes up to 700 mm completely, in a few seconds
  • Be staffed by one person, at one workstation
  • Take up less floor than a tunnel, about one square meter
  • Shield the surroundings with a closed shutter

Niet

  • Handle throughput: the box comes back, so there is no continuous flow
  • Boxes over 700 mm, that is what the scan tunnel is for
  • Process more than one box at a time
  • Read a pallet, that is what the Faraday cage is for

Want to find out whether a scan cabinet fits your process?

Put one process on the measuring stick. One location, temporary labels and a baseline measurement, with a clear go or no-go.

Talk through your processRequest a Proof of Value
Talk through your process